Coupling elements
Hydrokomp Hydraulische Komponenten GmbH Logo

Select your language

Inquiry list

Coupling elements

 

Coupling mechanisms
built-in and threaded body designs

 

 

 

Coupling nipples
built-in and threaded body designs

 

 

Screw-in tools
for coupling elements
(Accessory)

Mounting tools
for the replacement
of the system seal at
coupling mechanisms
(Accessory)

Description

Coupling elements of HYDROKOMP are made of stainless materials. This enables the elements to be used for all fluids and gases that are not aggressive. Special designs eg. for water steam or other media are available on request. HYDROKOMP offers coupling elements for two different operating modes depressurized coupling or pressurized coupling. The elements for depressurized coupling can be coupled pressurized up to 25 bar, if the specified volume flow is not be exceeded. When using higher operating pressure there ockures a risk of demaging the soft seal in the check valve as the result of high flow velocities of the fluid. This means for coupling of air up to 10 bar there should be always used the coupling elements for depressurized coupling. This also applies when the coupling process is initiated pressurized. The elements which can be coupled pressurized may be coupled up to the maximum specified operating pressure on one side and / or on both sides.

The built-in elements are particularly suitable for installation in plates of multiple coupling systems. Threaded body elements can be directly scewed into the fixture body, for example of a tool change system. There, they are ideal suitable as an interface for medium transfer.

 

Special features:
  • stainless materials and replaceable system seals for long service life

  • ideal for space-saving installation in individual receiving housings

  • transmission of liquid and gaseous mediums and vacuum

  • pressurized or depressurized coupling

  • various with four nominal diameters

  • standard elements and special designs available

  • HT-Variant operating temperature up to 200°C NEU!


Operating conditions:

Coupling nipple and coupling mechanism must face coaxially each other before the coupling process. The base plates of both elements must be guided about 2 to 3 mm before contact of the sealing surfaces within the radial positioning tolerance. The coupling force between coupling nipple and coupling mechanism resulting from hydraulic pressure according to the formula has to be compensated positively from the outside.

The axially acting front seal areas must be protected from contamination. Good results can be archieved by rinsing and following blowing-off with compressed air. The sealing of the mechanism is done in the drill base of the mounting hole. The required surface quality in the drawing has to be kept.

 

A = status uncoupled
B = status coupled
C = coupling nipple
D = coupling mechanism
E = coupling stroke
F = axial position tolerance
 
 
 

 

 

Hotline

We gladly consult you by phone call:

Customer service on-site

Find a consultant in your area!

Weltkarte mit HYDROKOMP Vertriebspartnerländern weltweit

Technology that connects

HYDROKOMP Headquarters 1

Founded 1998, HYDROKOMP designs, manufactures and distributes hydraulic components, coupling systems and clamping technology for mechanical engineering, fixture construction, tooling and many other branches of industry also for different operating conditions.

HYDROKOMP Headquarters 2

HYDROKOMP is the right supplier for companies of mechanical engineering fixture construction, tooling and many other branches of industry worldwide. Constructive ideas and customer-specific designs are our particular strengths.

HYDROKOMP Production Facility 1

Each and every one of our products is developed and manufactured according to the highest quality standards. With modern CAD systems we design new solutions. After that, current procedures of precision manufacture and quality assurance are next in process.

HYDROKOMP Production Facility 2

Our qualified employees and our modern CNC machinery ensure high flexibility product variety and quality. HYDROKOMP products are designed for long-lasting application in rough industrial daily routine. Our customers can surely trust that the process will flow smoothly.

previous arrow
next arrow

 

 

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.